Nowadays, there are so many products of ao smith flame sensor resistance in the market and you are wondering to choose a best one.You have searched for ao smith flame sensor resistance in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith flame sensor resistance which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
575 reviews analysed
1. Water Heater Ignitor and Flame Rod for AO Smith 9003626005
Water Heater Nitride Ignitor and Flame Sensor Assembly for AO Smith part number 9003626005. 5 Connection Molex Plug. Metal mounting Bracket.
2. Rheem SP20172 Flammable Vapor FV Sensor Kit
3. OEM Upgraded Replacement for Rheem Furnace Flame Sensor 62-23543-01 by Replacement for Rheem (Original Version)
Brand new furnace flame sensor, replaces Rheem, 62-23543-01.
4. 10 Pieces Flame Sensor Replacement Compatible with Goodman 0130F00010 B11726-06
- Compatible with: the heating sensor replacement is designed for gas HVAC systems, total length of the flame sensor is 3.66 inch
- Easy to install: assemble it by yourself, only several steps to install the sensor, you can follow our install process and replace the broken sensor easily to keep your home warm and comfortable
- Good performance: the flame sensor is designed to detect the flame, it can help you to solve some problems, such as keep shutting off, staying on once it fires up, quickly shut off after you start it, you don’t need to frustrate these issues again
- Quality material: our flame sensor replacement is made of quality and wear-resists metal and ceramics, and it had been well-tested by the manufacturer, which can last for long time
- Application: when your flame sensor was broken, the stove will light for several seconds and then turn back off on the flame sensor safety, replace the old flame detector in time
The flame sensor is designed to detect the flame, it can help you to solve some problems such as keep shutting off, staying on once it fires up, quickly shut off after you start it, you don’t need to frustrate these issues again.
When your flame sensor was broken, the stove will light for several seconds and then turn back off on the flame sensor safety, replace the old flame detector in time.
Size: approx. 9.3 cm/ 3.66 inches in length
Color: silver, white
Material: metal and ceramics
10 x Flame sensor replacement
Manual measurement, please allow slight errors on size.
This is a compatible spare part and the part numbers have been mentioned above for reference purposes only.
5. OEM Upgraded Replacement for Goodman Furnace Flame Sensor B11726-06 by part
Replacement Flame Sensor Rod part number SP208.Direct Replacement for number 0130F00010.Replacement for old style number B11726-06.Rod Measures 2 Inches Long.1/4 inch Male Terminal for Wire Connection.
6. Furnace Flame Sensor for Goodman 0130F00010 fit B1172606 B11726-06 20488501 ACS90453BXA P1257001F P1257007F ACS90703BXA P1257002F P1257008F Replacement
- PARTS NUMBER: 0130F00010 New Upgraded Furnace Flame Sensor
- Replaces Part Numbers: AP4513976, 0130F00010,b11726-06
- Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw gas from dumping into your home.Easy to install!
- QUALITY: The replacement part is made from durable and resists wear material, and well-tested by the manufacturer.
- SOLVE PROBLEMS QUICKLY:We have an excellent service team and you can contact us if you have any questions.
0130F00010 New Upgraded Furnace Flame Sensor works with the following brands: Whirlpool, Kenmore, Maytag, Estate, Roper, Magic Chef
Fit Models numbers: GMS80603AX, GMS80604BX, GMS80603AN, GMS80604BN, GMS80804BN, GDS80403AN, GDS80603AN, GDS80804BN, GDS81005CN, GMSS960402BN, GMSS960603BN, GMSS960803BN, GCSS960402BN, GCSS960603BN, GCSS960804CN, GCSS961005CN, GCSS961205DN.
This is not OEM. High-quality replacement
Possible Repair Solution For:
Not working properly, spins slowly, will not agitate, burning smell, unusual noises.
the brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
7. Rheem 62-23543-01 Flame Sensor Rod for Rheem, Ruud and Weatherking Furnaces
- Termination: 1/4 inch male quick connect
- Length mounting flange to sensor tip: 2.5 inch
- Length sensor offset: 1-9/16 inch
- Angle sensor offset (degrees): 90
- Length – Mounting Flange To Sensor Tip (Inches): 2-1/2.
- Angle – Sensor Offset (Degrees): 90.
- Ordering Notes: The gas code is the first two letters of the unit’s serial number.
- Length – Sensor Offset (Inches): 1-9/16.
- Termination: 1/4 Inch Male Quick Connect.
Flame sensor – intermittent pilot – rheem/ruud/protech – a complete line of oem and factory Replacement parts for your furnace; air conditioner; water heater; air handler; boiler; rooftop unit and more.
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Neuco Inc. 62-23543-01 Flame Sensor.
8. OEM Upgraded Replacement for Carrier Furnace Flame Sensor LH680014 by Carrier (Original Version)
This is a Brand New Furnace Flame Sensor
9. Poweka LH680014 LH680534 Flame Sensor Replacement for Carrier Bryant Payne Day & Night Furnace LH33WZ511 LH33WZ515
- ★[Replaces Part Number]-LH680534, LH680012, LH680014, LH33WZ511, LH33WZ515, and LH33WZ517
- ★[Perfectly Fit]-Direct Replacement For Carrier – Bryant – Day & Night – Payne
- ★[Compatibility] -Used on these Bryant & Carrier models: 330AAV, 330JAV, 333BAV, 333JAV, 398AAV, 58DHC, 58DXC, 58PAV, 58SSC, 58SXC, 58TUA and 58WAV
- ★ [Premium Quality]-High quality alumina ceramic insulator, High temperature kanthal flame rod material that can withstand 1800F
- ★[Spec] -Ceramic Length 1-1/2″ 1/4″ Male Quick Connect Terminal with 4-3/4″ Wiring Harness,Bent Flame Sensor – 73 Degree Bend Angle
Furnace Flame Sensor Replacement For Carrier Bryant Payne Day & Night LH680534
LH680534 flame sensor is the direct replacement for many Carrier, Bryant, Payne, and Day & Night gas furnaces.
Part numbers LH680012, LH680014, LH33WZ511, LH33WZ515, and LH33WZ517.
The mounting hole is at approximately the 2:00 O’ Clock position with the sensor sitting on a flat
surface with the bend pointing to the left.
When the flame sensor goes bad, the furnace will light for several seconds and then turn back
off on the flame sensor safety
10. Part # PFS014 Furnace Electrode Flame Sensor for Carrier Bryant LH33WZ511 LH33WZ515
This igniter is a replacement for Carrier, Bryant, Payne LH33WZ511, LH33WZ515, LH680012, LH680014. Flame sensor for Hot Surface Ignition (H. S. I. ) systems Can be mounted remotely on multiple burners or adjacent to igniter on other applications For use with spark ignition and flame sensing High quality alumina ceramic insulator High temperature kanthal flame rod material that can withstand 1800°F Features 45 Degree For use with Carrier LH33ZS004 igniter Used on these Bryant & Carrier models: 330AAV, 330JAV, 333BAV, 333JAV, 398AAV, 58DHC, 58DXC, 58PAV, 58SSC, 58SXC, 58TUA and 58WAV
By our suggestions above, we hope that you can found Ao Smith Flame Sensor Resistance for you.Please don’t forget to share your experience by comment in this post. Thank you!